Diagnostic Tools; Viewing Crimson Information; Freezing An Image; Test Patterns - Christie Mirage HD25 User Manual

Diagnostic tools

Follow these procedures to help with diagnosing issues with Crimson.

Viewing Crimson information

View the licenses for the software added to Crimson and the licenses of the software used to operate
Crimson. The information is read-only.
1. To view the additional software added to Crimson, select MENU > Admin > Licenses.
2. To view the software licenses used to run Crimson, select MENU > Admin > About.

Freezing an image

Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image.
For example, in moving images sometimes it is difficult to observe artifacts such as external de-
interlacing/resizing and signal noise.
1. Select MENU > Admin > Diagnostics.
2. To enable freezing of an image, select Freeze Image and select Enter.
3. To return to normal operation, select Enter again to clear the checkbox.

Test patterns

Use the projector to assist with configuration of the projector and to diagnose any issues that may
occur.

Selecting a test pattern

21 test patterns are available to assist with the configuration of the projector and to diagnose any
issues that may occur.
1. From the side panel home page, use the arrows to select Test Pattern.
You can also select the test patterns from MENU > Test Pattern or MENU > Diagnostics >
Test Pattern.
2. Scroll through the list of test patterns.
3. Select the required test pattern.
4. To confirm your selection, select Enter.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
51