Diagnostic tools
Follow these procedures to help with diagnosing issues with Mirage SST.
Viewing Mirage SST information
View the licenses for the software added to Mirage SST and the licenses of the software used to
operate Mirage SST. The information is read-only.
1. To view the additional software added to Mirage SST, select MENU > Admin > Licenses.
2. To view the software licenses used to run Mirage SST, select MENU > Admin > About.
Freezing an image
Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image.
For example, in moving images sometimes it is difficult to observe artifacts such as external de-
interlacing/resizing and signal noise.
1. Select MENU > Admin > Diagnostics.
2. To enable freezing of an image, select Freeze Image and select Enter.
3. To return to normal operation, select Enter again to clear the checkbox.
Test patterns
Use the projector to assist with configuration of the projector and to diagnose any issues that may
occur.
Selecting a test pattern
21 test patterns are available to assist with the configuration of the projector and to diagnose any
issues that may occur.
1. From the side panel home page, use the arrows to select Test Pattern.
You can also select the test patterns from MENU > Test Pattern or MENU > Diagnostics >
Test Pattern.
2. Scroll through the list of test patterns.
3. Select the required test pattern.
4. To confirm your selection, select Enter.
Mirage SST User Guide
020-102993-01 Rev. 1 (06-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
53