Telnet - Multitech MultiVOIP 100 MVP110 User Manual

7. After you have changed the configuration of the remote MultiVOIP , click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
8. Click Exit when downloading is complete.
9. Double-click the MultiVOIP Configuration icon in the MultiVOIP 100 program group to verify
that the MultiVOIP is running.

Telnet

A typical Telnet client application is described next. The MVP110 has a built-in Telnet Server that
enables Telnet client PCs to access the MVP110. A typical Telnet client is allowed to configure the
MVP110. In addition, the MVP110 can be remotely accessed and configured from anywhere on the
Internet through its Web interface.
The Telnet Server option has to be selected from the Applications Setup dialog box using the
MultiVOIP 100 Configuration icon. Click Start I Run and enter telnet in the Run window and a blank
Telnet screen displays. Click Connect | Remote System and the Connect dialog box displays.
Select from the drop-down list (or enter) a Host Name (the IP address of the MultiVOIP). Then select
telnet from the Port list and vt100 from the Term Type list.
Once you have entered a valid Host Name (IP address), Port, and Term Type, click Connect to be
connected to the target MultiVOIP. The MultiVOIP Telnet Server menu displays.
MultiVOIP Telnet Server Menu
The MultiVOIP Telnet Server menu provides three basic options: Voice over IP Configuration, Phone
Chapter 5 - Remote Configuration and Management
66