Snmp Statistics; Viewing Logs - Multitech MultiVOIP 100 MVP110 User Manual

Chapter 4 - MultiVOIP Software
established. If not, that may indicate the web server is not enabled. Or, if you were having problems
establishing a remote connection through TFTP, you could look in the UDP section to see if any
packets are being received. If not, you may need to review your network addressing.

SNMP Statistics

The SNMP Statistics dialog box provides statistical information on Simple Network Management
Protocol (SNMP).
SNMP is an application layer protocol that facilitates the exchange of management information
between network devices. There are three key components in SNMP: (1) the devices that are to be
managed, (2) agents, and (3) the network management systems. The managed device is the network
device, like a router. The agent is the software module residing in the managed device pertaining to
network management. The network management system runs the SNMP application that controls the
managed devices and monitors their status. Four primary operations -- Set, Get, Get Next, and Trap -
- are performed using SNMP.

Viewing Logs

The Log Entries dialog box displays a chronological history of all calls into and out of this unit. This
dialog box is opened by clicking Logs on the Statistics dialog box.
56