Multitech RouteFinder RF600VPN Quick Start Manual
Internet security appliance
Hide thumbs
Also See for RouteFinder RF600VPN:
- User manual (189 pages) ,
- Reference manual (18 pages) ,
- Reference manual (12 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Multitech RouteFinder RF600VPN
Summary of Contents for Multitech RouteFinder RF600VPN
- Page 1 RF760/660/600VPN Internet Security Appliance Quick Start Guide...
- Page 3 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
-
Page 4: Table Of Contents
Example 2: Remote Client-to-LAN VPN Configuration ... 22 Example 3: Remote Client-to-LAN Configuration Using DNAT and Aliasing ... 23 Example 4: Client-to-LAN Configuration Using PPTP Tunneling ... 24 Chapter 5 - URL Categorization ... 25 Contents Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 5: Chapter 1 - Introduction
RouteFinder VPN up and running. A User Guide with more detailed information is provided on the RouteFinder VPN CD. Other References In addition to the User Guide, the following Reference Guides are available on the CD as well as the Multi-Tech Web site at www.multitech.com: The RouteFinder configured with DNAT and aliases. -
Page 6: Safety Recommendations For Rack Installations
Note: If any of these items are missing, contact Multi-Tech Systems or your dealer or distributor. Inspect the contents for signs of any shipping damage. If damage is observed, do not power up the RouteFinder VPN; contact Technical Support at Multi-Tech Systems, Inc. -
Page 7: Typical Applications
Internet hackers. The RouteFinder VPN provides a full-featured firewall based on Stateful Packet Inspection technology and NAT protocol to provide security from intruders attempting to access the office LAN. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Chapter 1 – Introduction... -
Page 8: Chapter 2 - Installation
(LAN on eth0) Network Card connected to the external network (WAN on eth1) Network Card connected to the DMZ (eth2) IP Address Net Mask ___.___.___.___ ___.___.___.___ ___.___.___.___ ___.___.___.___ ___.___.___.___ ___.___.___.___ Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Default Gateway ___.___.___.___... -
Page 9: Cabling Procedure
Never switch off the RouteFinder VPN Power until after you have performed the Shutdown process. If the RouteFinder VPN is not properly shut down before switching off Power, the next startup may take a little longer, or in the worst case, data could be lost. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Chapter 2 – Installation... -
Page 10: Setting Up A Workstation And Starting The Routefinder Vpn
WINIPCFG. In Windows 2000/NT/ME/XP, you can type IPCONFIG. In some environments, one or more Security Alert screen(s) may display. At the initial Security Alert screen, click Yes and follow any additional on-screen prompts. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) - Page 11 The Web Management Home screen is displayed. Web Management software is factory-installed on your RouteFinder. (This is a view of the top part of the Home screen.) (This is a view of the Multi-Tech Systems, Inc. informational part of the Home screen.) Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Use a safe password! Your first name spelled backwards Chapter 2 –...
-
Page 12: Navigating Through The Screens
Change passwords and quickly set up your RouteFinder VPN with the basic configuration that will set it up as a firewall. Help Describes what to do on each screen. Logout Logout and return to the login screen. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Screen Buttons Screen Name Work/Input... - Page 13 Tracking Packet Filters Accounting Packet Filter Rules Update Services ICMP Backup Advanced Version Control Enable/Disable Log Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Network Setup Proxy HTTP Proxy Interface Custom Filters SMTP Proxy PPPoE SMTP SPAM Filtering DHCP Client...
-
Page 14: Initial Web Administration Steps
Set System Time by selecting your Time Zone • Set the current Day, Month, Year, Hour, and Minute Administration System Setup Displays as soon as Administration is selected from the Menu Bar. System Time Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 15: Chapter 3 - Using The Wizard Setup
This information can be found in the RouteFinder User Guide on the RouteFinder CD. RouteFinder Initial Configuration The addresses used in this example are entered through the Wizard Setup. See the screen example on the next page. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 16: The Wizard Setup Screen
If you are not redirected, change the address in the location bar to 192.168.2.1. Test your workstation to see that it can access the Internet. If a connection is established, then the settings have been entered correctly. Your Basic Configuration Is Now Complete. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 17: Chapter 4 - Configuration Examples
5. Packet Filters > Packet Filter Rules LAN – Any – Any – Accept RemoteLAN – Any – Any – Accept Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Chapter 4 – Configuration Examples Site B - Static IP Addresses (continued) 6. - Page 18 Networks added using the Add Network/Host on this screen will display in the Remote Gateway IP and Remote LAN dropdown boxes on the VPN > IPSec > IKE screen. Name IP Address RemoteLAN 192.168.10.0 RemoteWAN_IP 204.26.122.3 Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Subnet Mask Options 255.255.255.0 Edit | Delete 255.255.255.255 Edit | Delete...
-
Page 19: Using The Setup Wizard
The rule LAN – Any – Any – Accept, which displays at the bottom of the screen, was created when you performed your initial setup using the Setup Wizard. The rule entered in the Setup Wizard displays in this table Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Chapter 4 – Configuration Examples View Rules by clicking the Show button. - Page 20 Establish an IPSec Protocol for your remote branch office access: click on VPN > IPSec. Check the VPN Status box, and then click Save. Click the Add button for Add IKE Connection. The VPN IPSec > IKE screen displays. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L)
- Page 21 Then follow the steps for Site A, except that now you will use the parameters for Site B listed in the example on the first page of this chapter. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) SiteA RemoteWAN_IP RemoteLAN Chapter 4 –...
-
Page 22: Example 2: Remote Client-To-Lan Vpn Configuration
Local Interface = WAN Local LAN Subnet = LAN Remote IP = Sentinel_Client (remote client static IP) Remote IP = Any (remote client dynamic IP) Remote Subnet = None UID = Disable Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 23: Example 3: Remote Client-To-Lan Configuration Using Dnat And Aliasing
Use this procedure to configure the RF660VPN with DNAT and Aliasing. This configuration allows a Windows 2000 Remote Client to Telnet through the RouteFinder VPN to several Windows 2000 Systems located on the LAN. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 24: Example 4: Client-To-Lan Configuration Using Pptp Tunneling
Use this procedure to configure the RouteFinder VPN as a PPTP server for VPN Remote Client Access (aka, PPTP Roadwarrior configuration). Note: IPX and Netbeui are not supported when using PPTP tunneling. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) -
Page 25: Chapter 5 - Url Categorization
URL Categorization section of this screen displays. The key number is located on the bottom of the RouteFinder chassis and on the front of the Quick Start Guide. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) The URL License number must be entered on the Administration > License Key... - Page 26 Return to the Proxy > HTTP Proxy screen. See the screen on the previous page. • Check the Transparent box and click Save. • Check the URL Filter box and click Save. • Click Edit for URL Categories (Allowed/Filtered). Not shown on the screen above. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L)
- Page 27 Filter categories are setup and controlled by the SurfControl software that is built into your RouteFinder VPN. There may be a category you would like to see added or deleted. The User Guide provides instructions for these requests. Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L) Chapter 5 – URL Categorization...
- Page 28 82013762L...
Need help?
Do you have a question about the RouteFinder RF600VPN and is the answer not in the manual?
Questions and answers