Multitech MultiVOIP 100 MVP110 User Manual page 22

Voice/fax over ip networks h.323 mode

Hide thumbs Also See for MultiVOIP 100 MVP110:

Table of Contents

4. The MVP110 Setup welcome dialog box displays.

Press Enter or click Next to continue.

5. The Choose Destination Location dialog box displays. Follow the on-screen instructions.

You can either choose the Destination Location of your MVP110 software or select the default

destination by clicking Next. If you click Browse, you can select a different destination folder for the

MVP110 software.

6. In the Select Program Folder dialog box, select where you want the program file to be located.

Verify the path and click Next to continue.

7. The Copying program files window displays, followed by the MVP110 Setup dialog box. This

dialog box enables you to select the COM port of your PC that is connected to the Command port

Chapter 3 - Software Loading and Configuration

Table of Contents

Need help?

Do you have a question about the MultiVOIP 100 MVP110 and is the answer not in the manual?