Multitech MultiVOIP 100 MVP110 User Manual page 32

34. Enter the phone number for the MultiVOIP in the Station Information group Phone Number
box.
35. Click inside the Description box and enter a description for the remote MVP110 phone number
for the Voice/Fax Channel.
36. In the Station Identification group, select HUNT GROUP #2 from the Hunt Group list, enter the
London Office's IP Address (202.056.039.100), and accept the H.323 industry standard Port
value (1720) used to communicate with other H.323 endpoints.
37. Click OK and you are returned to the Phone Directory Database dialog box which now includes
the second number and related information in the Phone Number list.
38. To configure a stand-alone endpoint (a PC with NetMeeting software), click Add and the Add/
Edit Phone Entry dialog box displays again.
39. Enter the phone number for the stand-alone endpoint in the Station Information group Phone
Number box. For example, 301.
40. Click inside the Description box and enter a description for the remote MVP110 phone number.
For example, "Human Resources Desk".
Note: Because the H.323 endpoint is not a MVP110, the Phone Directory database ignores the
Voice Channel entry. It does not matter what value is entered.
41. In the Station Identification group, select NO HUNT from the Hunt Group list, enter the
Human Resource Desk's IP Address and accept the H.323 industry standard Port value (1720)
used to communicate with other H.323 endpoints.
Note: This stand-alone was not configured as part of a Hunt Group. However, depending on your
requirements, you could configure a stand-alone to be part of a Hunt Group.
Chapter 3 - Software Loading and Configuration
32