Preview Of This Guide - Multitech MultiVOIP 100 MVP110 User Manual

Preview of this Guide

This guide describes the MVP110 and tells you how to install and configure the unit. The information
contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 describes the MVP110 and provides a typical application, describes front panel indicators,
back panel connector descriptions, and lists relevant specifications.
Chapter 2 - Installation
Chapter 2 provides information on unpacking and cabling your MVP110. The installation procedure
describes each cable connection.
Chapter 3 - Software Loading and Configuration
Chapter 3 provides instructions for software loading and initial configuration. Later chapters, as well
as the online Help, describe the MVP110 software in more detail.
Chapter 4 - MVP110 Software
Chapter 4 describes the MVP110 software package designed for the Windows environment. For
explanations and parameters of each element of the user interface, refer to the Help.
Chapter 5 - Remote Configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote MVP110. Remote
configuration enables you to change the configuration of a unit by simply connecting two modems
between the two MVP110s and remotely controlling the unit. Chapter 5 also describes typical client
applications (such as Telnet and Web-based management) used for remote configuration of the
MVP110.
Chapter 6 - Warranty, Service and Tech Support
Chapter 6 provides instructions on getting service for your MVP110 at the factory, a statement of the
limited warranty, information about our Internet presence, and space for recording information about
your MVP110 prior to calling Multi-Tech's Technical Support.
Chapter 1 - Introduction and Description
7