Mvp110 Configuration - Multitech MultiVOIP 100 MVP110 User Manual

Chapter 4 - MultiVOIP Software

MVP110 Configuration

The MVP110 Setup menu consists of 10 buttons, an Events window in the middle of the menu, and a
status bar at the bottom of the menu. The 10 buttons allow you to display and change the voice
channels and IP protocol parameters, display and manage the Phone Book listing, view statistics and
call progress, and change features such as SNMP Agent, Telnet Server, WEB Server, and assign a
MVP110 password.
The Events window in the lower third of the Setup menu provides information about the boot process.
The status bar at the bottom of the Setup menu displays the current status of the unit and shows, for
example, if it is Running, the most recent date the unit was configured, the type of connection you
have to the unit, and your rights. It shows if your PC is connected directly to the command port of the
MVP110 or is communicating with the Ethernet port. The Rights box which displays whether you
have Read/Write or Read-Only rights. The first user to communicate with the MVP110 command port
has Read/Write rights that enable the user to view and/or change the configuration of the MVP110.
Any additional simultaneous users have Read-Only rights and can only display the configuration of
the MVP110 but are prohibited from changing the configuration.
42