Multitech MultiVOIP 100 MVP110 User Manual page 27

of the jitter buffer directly effects the voice delay between MVP110 gateways.
The Minimum Jitter Value default setting is 150 milliseconds, the Maximum Jitter Value default
setting is 300 milliseconds, and the Optimization Factor default setting is 7.
If your country/region is not the default USA, click the Regional tab and proceed to step 25;
otherwise, proceed to step 26 to begin building your phone directory database.
25. To change the Tone Pairs on the Regional tab, select your country or region from the Country/
Region list. If your country or region is not listed, click Custom to define it.
The Tone Pairs group enables you to select and modify the parameters. Click OK when
finished. Proceed to step 26 to begin building your phone directory database.
26. The Phone Directory Database dialog box displays with the Proprietary PhoneBook option
enabled and no phone numbers entries displayed in the database. This dialog box enables you to
select either the GateKeeper or Proprietary PhoneBook. Once you have choosen the type of
Phone Book database, you can proceed to registering with a Gatekeeper in the following section
(entitled, Registering with a Gatekeeper Phone Directory). If you are building a proprietary
phone book, proceed to Building a Proprietary Phonebook Directory.
Note: Each of these sections starts with a step 27.
Chapter 3 - Software Loading and Configuration
27