Multitech MultiVOIP 100 MVP110 User Manual page 64

Verify that the Communication Type is set for COM Port and the COM port of your local PC is
selected in the Select Port list.
In the Dial String box, enter the AT command for dialing (ATDT) plus the phone number of the
remote MVP110.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the default values to match your modem.
Click OK when you are satisfied with your selections.
6. Run the MVP110 Configuration program. Click Start | Programs | MultiVOIP 100 | MultiVOIP
Configuration, or double-click the MultiVOIP Configuration icon in the MultiVOIP 100 program
group.
7. The Dialing dialog box displays while software is dialing the remote MultiVOIP.
8. The Reading Setup dialog box displays.
9. The MultiVOIP 100 Setup menu displays. This is the dialog box of the remote MultiVOIP. Refer
to the online Help for a description of the user interface.
10. After you have changed the configuration of the remote MultiVOIP, click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
11. Click Exit when downloading is complete.
12. The Hangup connection? dialog box displays.
Click Yes to disconnect the phone connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future, you can
remove it from the Port Setup dialog box.
Chapter 5 - Remote Configuration and Management
64