Multitech MultiVOIP 100 MVP110 User Manual page 29

33. Leave the Description box blank.
34. Enter the Voice Channel number corresponding to the phone number entered.
35. Fill in the H.323 ID box with a description to identify the phone number. For this example, you
could enter "New York Office".
36. Enter the IP Address of the MultiVOIP you are currently configuring in the IP Address box.
37. Click OK when you are finished and the Phone Directory Database dialog box displays with
your first entry in the window.
38. Click OK when you are finished.
39. Click OK to download setup.
40. The following dialog box displays.
Click OK to download default setup.
41. After the setup has been written to the MVP110, the unit is rebooted.
42. Verify that the BOOT LED on the MVP110 is off after the download completes. This may take
several minutes as the MVP110 reboots.
Chapter 3 - Software Loading and Configuration
29