Configuration Encrypt - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
delay-time
Usage guidelines
The system creates a rollback point to record the configuration status when you execute this
command to start the configuration commit delay timer. The settings you made during the commit
delay interval takes effect immediately. However, these settings will be removed automatically if you
have not manually committed them before the configuration commit delay timer expires. Then, the
system returns to the configuration status when the commit delay timer started.
This feature prevents a misconfiguration from causing the inability to access the device and is
especially useful when you configure the device remotely.
When you use this feature, follow these restrictions and guidelines:
•
In a multi-user context, make sure no one else is configuring the device.
•
To avoid unexpected errors, do not perform any operations during the configuration rollback.
•
You can reconfigure the configuration commit delay timer before it expires to shorten or extend
the commit delay interval. However, the rollback point will not change.
•
The configuration commit delay feature is a one-time setting. The feature is disabled with the
rollback point removed when the commit delay timer expires or after a manual commit operation
is performed. To use this feature again, you must re-execute this command.
Examples
# Set the configuration commit delay timer to 10 minutes.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Change the configuration commit delay timer to 60 minutes before the old delay timer expires.
[Sysname] configuration commit delay 60
The commit delay already set 10 minutes, overwrite it? [Y/N]:y
Related commands
configuration commit

configuration encrypt

Use
configuration encrypt
Use
undo configuration encrypt
Syntax
configuration encrypt { private-key | public-key }
undo configuration encrypt
Default
Configuration encryption is disabled.
Views
System view
: Sets the configuration commit delay interval. The value range is 1 to 65535 minutes.
to enable configuration encryption.
to disable configuration encryption.
161