HP Enterprise FlexFabric 12900E Series Command Reference Manual page 179

Views
User view
Predefined user roles
network-admin
Parameters
ipv4-server
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
ipv6 ipv6-server
a case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
src-filename
a .cfg file. The file name is a case-insensitive string of up to 255 characters.
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If the TFTP server is on the public network, do not specify
this option.
Usage guidelines
Before restoring the configuration file for the next startup, make sure the following requirements are
met:
•
The server is reachable.
•
The server is enabled with TFTP service.
•
You have read and write permissions to the server.
This command downloads the configuration file to the root directory of the default storage medium on
each MPU and specifies the file as the main next-startup configuration file. If the default storage
medium has been partitioned, the configuration file is saved on the first partition. Make sure all MPUs
use the same type of default storage media. If a standby MPU uses a different type of default storage
medium than the active MPU, the command cannot propagate the configuration file to the standby
MPU. For example, the standby MPU uses a USB disk, but the active MPU uses a flash memory. In
this situation, you must manually restore the next-startup configuration file on the standby MPU.
Examples
# Download test.cfg from the IPv4 TFTP server at 2.2.2.2 in the public network, and specify the file
as the main next-startup configuration file.
<Sysname> restore startup-configuration from 2.2.2.2 test.cfg
Restoring the next startup-configuration file from 2.2.2.2. Please wait...finished.
# Download test.cfg from the IPv4 TFTP server at 2.2.2.2 in MPLS L3VPN instance VPN1, and
specify the file as the main next-startup configuration file.
<Sysname> restore startup-configuration from 2.2.2.2 test.cfg vpn-instance VPN1
Restoring the next startup-configuration file from 2.2.2.2. Please wait...finished.
# Download test.cfg from the IPv6 TFTP server at 2001::2 in the public network, and specify the file
as the main next-startup configuration file.
<Sysname> restore startup-configuration from ipv6 2001::2 test.cfg
Restoring the next startup-configuration file from 2001::2. Please wait...finished.
Related commands
backup startup-configuration
: Specifies a TFTP server by its IPv4 address or host name. The host name is a
: Specifies a TFTP server by its IPv6 address or host name. The host name is
: Specifies the name of the configuration file to be downloaded. The file must be
: Specifies an MPLS L3VPN instance by its name, a
173