Databits - HP Enterprise FlexFabric 12900E Series Command Reference Manual

If you use the
authorization is enabled for all user lines in the class. You cannot use the
authorization
Examples
# Enable command authorization for VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command authorization
Related commands
authorization command
command accounting

databits

Use
databits
Use
undo databits
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for a character.
Views
User line view
Predefined user roles
network-admin
Parameters
: Uses five data bits for a character.
5
: Uses six data bits for a character.
6
: Uses seven data bits for a character.
7
: Uses eight data bits for a character.
8
Usage guidelines
This command is not supported in VTY line class view.
This setting must be the same as the setting on the configuration terminal.
Examples
# Configure AUX 0 to use seven data bits for a character.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] databits 7
command authorization
command in the view of a user line in the class.
(User Access and Authentication Command Reference)
to specify the number of data bits for a character.
to restore the default.
command in user line class view, command
51
undo command