Ftp Server Enable; Ftp Server Ipv6 Dscp - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Default
IPv4 uses the DSCP value 0 for FTP packets sent to an FTP client.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value
Usage guidelines
The DSCP value is carried in the ToS field of an IP packet to indicate the transmission priority of the
packet.
Examples
# Set the DSCP value for IPv4 to use for outgoing FTP packets to 30 on an FTP server.
<Sysname> system-view
[Sysname] ftp server dscp 30

ftp server enable

Use
ftp server enable
Use
undo ftp server enable
Syntax
ftp server enable
undo ftp server enable
Default
The FTP server is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the FTP server.
<Sysname> system-view
[Sysname] ftp server enable

ftp server ipv6 dscp

Use
ftp server ipv6 dscp
client.
Use
undo ftp server ipv6 dscp
Syntax
ftp server ipv6 dscp dscp-value
: Specifies a DSCP value in the range of 0 to 63.
to enable the FTP server.
to set the DSCP value for IPv6 to use for FTP packets sent to an FTP
to disable the FTP server.
to restore the default.
89