Escape-Key - HP Enterprise FlexFabric 12900E Series Command Reference Manual

VTY 2 :
Location: 192.168.1.134
+ : Current operation user.
F : Current operation user works in async mode.
Table 12 Command output
Field
Idx
Line
Idle
Time
Pid
Type
+
Location

escape-key

Use
escape-key
Use
undo escape-key
Syntax
escape-key { key-string | default }
undo escape-key
Default
The escape key is Ctrl+C.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
key-string
an ASCII code value in the range of 0 to 127. For example, if you configure
shortcut key is Ctrl+A. If you configure
character d or D for this argument, the actual shortcut key is Ctrl+C. To use d or D as the shortcut
key, you must specify the ASCII code value of the character for this argument. For information about
ASCII code values of individual characters, see the standard ASCII code chart. For information
about ASCII code values of combined keys that use the Ctrl key, see
: Restores the default escape key Ctrl+C.
default
Description
Absolute number of the user line.
Type and relative number of the user line.
Time elapsed after the user's most recent input, in the hh:mm:ss format.
Login time of the user.
Process ID of the user session.
User type:
•
TEL—Telnet user.
•
SSH—SSH user.
For a user who logged in through the console port, this field does not display anything.
User line you are using.
IP address of the user.
to set the escape key.
to disable the escape key.
: Specifies a shortcut key. It can be a character (case sensitive, except for d and D), or
, the shortcut key is a. If you specify the
escape-key a
56
escape-key 1
Table 7.
, the