Install Activate - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Table 28 Command output
Field
Record n
Name
*
Related commands
reset version-update-record

install activate

Use
install activate
Use
install activate
possible impact of the upgrade on the device.
Syntax
install
filename&<1-30> } * slot slot-number [ test ]
install activate patch filename { all | slot slot-number }
Views
User view
Predefined user roles
network-admin
Parameters
: Specifies a boot image file.
boot
: Specifies a system image file.
system
: Specifies a space-separated list of up to 30 feature image files.
feature
: Specifies a patch image file. You can specify only one patch image file for the command at a
patch
time. However, you can execute this command multiple times to activate multiple patch image files.
: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored
filename
in the root directory of a file system on the device. The value string excluding the file system location
section (if any) can have a maximum of 63 characters. For more information about specifying a file,
see managing file systems in Fundamentals Configuration Guide.
: Specifies all slots.
all
slot slot-number
: Only identifies the upgrade method to be used. If you do not specify this keyword, the
test
command activates the specified software images.
Usage guidelines
NOTE:
The system verifies the signature of an image before it activates that image. If the digital signature
verification fails, the system will not load the image and you will receive a digital signature verification
failure message.
Description
Number of the startup software image upgrade record. Record 1 is the most
recent record.
Software image file name.
The software image version changed during the upgrade.
to activate feature or patch images.
to activate software images or to identify the upgrade method and
activate { boot
: Specifies a card by its slot number.
filename | system
190
filename | feature