HP Enterprise FlexFabric 12900E Series Command Reference Manual page 30

Syntax
display role feature-group [ name feature-group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name feature-group-name
argument represents the feature group name, a case-sensitive string of 1 to 31 characters. If you do
not specify a feature group, the command displays information about all feature groups.
: Displays the commands of each feature in feature groups. If you do not specify this
verbose
keyword, the command displays only the feature lists of feature groups.
Usage guidelines
Feature groups L2 and L3 are predefined feature groups.
Examples
# Display the feature lists of feature groups.
<Sysname> display role feature-group
Feature group: L2
Feature: lacp
Feature: stp
...
Feature group: L3
Feature: route
Feature: staticrt
Feature: ospf
Feature: rip
...
# Display the commands in each feature group. For more information about the wildcards and marks
used in the command list, see
<Sysname> display role feature-group verbose
Feature group: L2
Feature: lacp
display link-aggregation *
display lacp *
system-view ; interface Bridge-Aggregation *
system-view ; interface Route-Aggregation *
system-view ; link-aggregation *
system-view ; lacp *
system-view ; interface * ; link-aggregation *
system-view ; interface * ; port link-aggregation *
system-view ; interface * ; lacp *
system-view ; probe ; display system internal link-aggregation *
system-view ; probe ; debugging system internal link-aggregation *
: Specifies a feature group. The
(LACP related commands)
(STP related commands)
(Route management related commands)
(Unicast static route related commands)
(Open Shortest Path First protocol related commands)
(Routing Information Protocol related commands)
Table 5.
(LACP related commands)
(R)
(R)
(W)
(W)
24
(W)
(W)
(W)
(W)
(W)
feature-group-name
(R)
(W)