<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-line-vty0-4]
Related commands
user-interface class
user-interface class
Use
user-interface class
Syntax
user-interface class { aux | vty }
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the AUX line class view.
aux
vty
: Specifies the VTY line class view.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the
command.
To configure the same settings for all user lines of a line class, you can use this command to enter
the user line class view.
The following commands are available in user line class view:
•
activation-key
•
auto-execute command
•
authentication-mode
•
command accounting
•
command authorization
•
escape-key
•
history-command max-size
•
idle-timeout
•
protocol inbound
•
screen-length
•
set authentication password
•
shell
•
terminal type
•
user-role
For commands that are available in both user line view and user line class view, the device uses the
following rules to determine the settings to use:
to enter user line class view.
command. As a best practice, use the
line class
82
line class