Passive; Put - HP Enterprise FlexFabric 12900E Series Command Reference Manual

passive

Use
passive
Syntax
passive
Default
The FTP operation mode is passive.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
FTP can operate in either of the following modes:
•
Active mode—The FTP server initiates the TCP connection.
•
Passive mode—The FTP client initiates the TCP connection.
When the FTP operation mode is passive, executing this command changes the mode to active.
When the FTP operation mode is active, executing this command changes the mode to passive.
This command is typically used together with a firewall to control FTP session establishment
between private network users and public network users.
Examples
# Change the FTP operation mode to passive.
ftp> passive
Passive mode on.
ftp> passive
Passive mode off.

put

Use to upload a file from the FTP client to the FTP server.
put
Syntax
put localfile [ remotefile ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
localfile
remotefile
Usage guidelines
You can perform this operation only after you log in to the FTP server.
to change the FTP operation mode.
: Specifies the local file to be uploaded.
: Specifies the name of the file for saving the uploaded file on the FTP server.
110