Table of Contents
Advertisement
Required configuration
Technical specifications of network connection
Intended information flow
Hazardous situations resulting from network failure
Installation manual
1 Internet
2 Secure network
3 CAT5 Ethernet
4 Planmeca dental unit
5 Planmeca Romexis Clinic Management module
The following network settings must be set during installation:
•
IP address
•
Subnet mask
•
Gateway
•
Romexis server IP address
•
Romexis communication port
The hospital network firewall must be configured to allow connection
between the dental unit and Planmeca Romexis.
•
Fast Ethernet (IEEE 802.310/100BASE-T)
•
Minimum requirements: CAT5 cable with RJ45 connector
The dental unit uses legacy PMU API protocol to communicate with
Planmeca Romexis software.
None.
2 Pre-installation requirements
Planmeca Compact i3
9
Advertisement
Table of Contents
Need help?
Do you have a question about the Compact i3 and is the answer not in the manual?
Questions and answers