Table of Contents
Advertisement
11 Chair swivel
About this task
Steps
Installation manual
In normal operation mode the seat can be swivelled up to 30° to the right or
left in steps of 5°. In service mode the chair can be swivelled to 90° position.
1. Release the locking mechanism by pressing the foot switch located on
the chair base and rotate the seat to 30° limit.
2. Lift the rotation limiter pin upwards with e.g. an Allen key.
3. Turn the seat to 90° limit.
4. To move the seat back to normal movement range lift the rotation limiter
pin upwards and move the seat to 30° limit. Then release the locking
mechanism by pressing the foot switch and move the seat to desired
position.
11 Chair swivel
Planmeca Compact i3
59
Advertisement
Table of Contents
Need help?
Do you have a question about the Compact i3 and is the answer not in the manual?
Questions and answers