The position value is output with "normal" counting direction. With the "inverted" counting
direction, 10,000,000mm minus the position value is output. This behavior can be influenced
using the "Static preset"/"Dynamic preset" modules (module 3 and module 4, respectively)
and the "Offset" module (module 5).
Counting direction "normal"
0 mm
Counting direction "inverted"
0 mm
Figure 8.12:Counting direction for position calculation
Leuze electronic
Position value = tape value
1,400,000 mm
Position value
8,600,000mm (=10,000,000mm - tape value)
Device parameters and interfaces
BPS 34
10,000,000 mm
Counting direction
10,000,000 mm
Counting direction
69