Table of Contents
Advertisement
Important note for printing:
1.
Select only those pages that are required.
2.
Change the printer settings so that the code is not distorted.
Suggestion for printer settings, see Figure 6.9.
3.
Verify the printing result by measuring the distance between two codes (see
Figure 6.10).
4.
Cut the code strips and concatenate them. It is important that the code content
always increases or decreases in blocks of 4 cm.
Figure 6.9:Printer settings for BCB repair kit
000020
Figure 6.10:Checking the print results of the BCB repair kit
Leuze electronic
40 mm
000024
000028
BPS 34
000032
000036
Bar code tape
37
Advertisement
Table of Contents
