Table of Contents
Advertisement
Device parameters and interfaces
8.1.3
PROFIBUS address
In the MS 34 103 and MS 34 105 modular connector hoods, the PROFIBUS address can be
set via two rotary switches and one slide switch.
The configuration and function of the address switches is shown in Figure 8.4.
Figure 8.4:Setting the PROFIBUS address in the MS 34 103/MS 34 105
8.1.4
General information on the GSD file
You can find the GSD file at www.leuze.com.
This file stores all the data required for the operation of the BPS 34. This data consists of
device parameters required for the operation of the BPS 34 and the definition of the control
and status bits. If parameters are changed in the project tool, for example, these changes
are stored in the project, not in the GSD file.
The GSD file is part of the device and must not be changed manually. The file is not changed
by the system either.
If the BPS 34 is operated in a PROFIBUS network, configuration must be performed exclu-
sively via the PROFIBUS. The functionality of the BPS 34 is defined via parameter sets. The
parameters and their functions are structured in the GSD file using modules. A user-specific
configuration tool is used during PLC program creation to integrate the required modules
and configure them appropriately for their respective use.
During operation of the BPS 34 on the PROFIBUS, all parameters are set to default values.
If these parameters are not changed by the user, the device functions with the default
settings delivered by Leuze electronic. For the default settings of the BPS 34, please refer
to the following module descriptions.
Note!
A least one module in the GSD file must be activated in the configuration tool for the control,
usually the "Position value" module 1.
46
Slide switch for the hundreds (marked with 10
Rotary switch for the tens (marked with 10
Rotary switch for the single digits (marked with 10
Connection plug to the BPS 34
BPS 34
2
)
1
)
0
)
Position of the slide
switches:
Top
address
100 - 126
Bottom address
1 - 99
Leuze electronic
Advertisement
Table of Contents
