Table of Contents
Advertisement
8.1.7.2 Module 2: Resolution
Description
With this module, the resolution for the position value of module 1 is defined. The BPS 34
also performs a rounding correction (The position value is divided by the defined value
range).
Note!
The resolution only determines the mathematical decimal value and has no effect on the
measurement accuracy.
Parameters
Parameter
a
The parameter specifies the res-
olution for the position value. The
resolution has no effect on -
Resolution
Static preset
in [mm]
Parameter length: 1 byte
Hex coding of module 2 "Resolution"
The value listed in the table shows the hex coding of the default settings.
0A
Input data
None
Output data
None
Leuze electronic
Description
addr.
- Dynamic preset
- Offset
03
Device parameters and interfaces
Rel.
Data
Value range
type
1: 0.01
2: 0.1
unsign
3: 1
0
8
4: 10
5: 100
6: 1,000
BPS 34
Default
Unit
CR to
module
3
mm
–
53
Advertisement
Table of Contents
