8.1.7
Detailed description of the modules
Note!
In the following detailed descriptions of the modules, you will find in the last column of the
tables cross references (CR) to parameters and input/output data of other modules
which are directly related to the described parameter. These cross references must be
observed during configuration.
The individual modules are numbered from 1 ... 27.
The parameters and input/output data within a module are alphanumerically labeled
a
from ...
Example:
a
The
Static preset value in [mm] parameter in module 3 only becomes active when the
preset teach occurs via module 12
Leuze electronic
z
.
Device parameters and interfaces
c
g
b
, 7
or 3
.
BPS 34
51