Maintenance
11
Maintenance
11.1
General maintenance information
Usually, the BPS 34 does not require any maintenance by the operator.
In the event of dust build-up, clean the optical window with a soft cloth; use a cleaning agent
(commercially available glass cleaner) if necessary.
Also check the bar code tape for possible soiling.
Attention!
Do not use solvents and cleaning agents containing acetone. Use of improper cleaning
agents can damage the optical window.
11.2
Repairs, servicing
Repairs to the device must only be carried out by the manufacturer.
Contact your Leuze distributor or service organization should repairs be required.
The addresses can be found on the inside of the cover and on the back.
Note!
When sending devices to Leuze electronic for repair, please provide an accurate description
of the error.
11.3
Disassembling, packing, disposing
Repacking
For later reuse, the device is to be packed so that it is protected.
Note!
Electrical scrap is a special waste product! Observe the locally applicable regulations
regarding disposal of the product.
100
BPS 34
Leuze electronic