Squarefold Trimmer Module; Third-Party Finishing Devices; Power On/Off; Power On - Xerox 770 User Manual

Product overview

SquareFold Trimmer Module

The SquareFold Trimmer Module is an optional finishing device that is used in conjunction
with the Light Production C Finisher with Booklet Maker.
Note
The SquareFold Trimmer Module is shown here with the required Interface Module and
the required Booklet Maker Finisher (and optional C/Z Folder).
Related Topics:
SquareFold Trimmer Module

Third-party finishing devices

Additional third-party, Document Finishing Architecture (DFA) devices are also available
for your machine. Information on these DFA devices can be obtained by contacting your
Xerox sales representative.

Power on/off

Power on

After turning the power on, the machine takes approximately 3 minutes to warm up
before you can start making copies.
1. Open the cover.
® 1-11
Xerox 770 Digital Color Press
User Guide