Camera Tab - FLIR Ariel CM-3102 User And Installation Manual

Accessing the CM-3102 via a Web Browser
To set a region of interest

6.3.3 Camera Tab

The Camera tab includes three screens: Exposure,
The Exposure screen is used for configuring basic exposure settings and day/night settings. The
configurable settings depend on the selected Exposure mode. In the Exposure section, select one of the
following modes: Auto, Advanced, Flickerless, Shutter Priority or
mode determines the other configurable settings.
Note:
Settings are saved automatically. Clicking Reset returns the settings to factory defaults.
6.3.3.1.1
Auto mode opens the shutter completely. Shutter speed and the AGC circuit function automatically in
cooperating with the iris to achieve a consistent exposure output. The exposure priority is given to the
iris. This mode is recommended to be used in indoor environments involving mixed lighting sources
where the main source is fluorescent lighting combined with natural light that enters the scene through
windows and other exposed areas. This is the default setting.
78
1.800.561.8187
From the ROI list, select ROI-1 or ROI-2.
In the Enable section, select ON. The default setting is OFF.
Use your mouse to draw a region of interest on the screen.
From the Level drop-down list, select a number between 1-6, where 1 is the lowest quality and 6
is the highest quality for the image within the region of interest.
Click Save. The region of interest is displayed on the screen.
To delete the region of interest, select ROI-1 or ROI-2 and click Clear. The ROI is deleted.
CM-3102-01-I Exposure Screen
Auto Mode
Ariel CM-3102 User and Installation Guide
www.
Picture Adjustment, and
. The choice of the Exposure
information@itm.com
.com
White Balance.
December 12, 2018