Table of Contents
Advertisement
Accessing the CM-3102 via a Web Browser
6.3.1.6.2
The FTP screen is used for configuring the settings of an FTP server located remotely on the network.
The server is used for saving snapshots and recordings of events that are configured from the
Source
To configure FTP server settings
70
1.800.561.8187
unencrypted across the network. The PLAIN authentication mechanism is
described in RFC 2595.
Login
The Login mechanism is supported by Microsoft's Outlook Express and
by some other clients.
TLS-TTLS
network stack to create a VPN.
Server Address
In the text box, enter the email server IP address.
Port
In the text box, enter the email server port number. The default port is 25.
User Name
In the text box, enter the email server user name.
Password
In the text box, enter the email server password.
In the Sender Settings area, configure the following settings:
Sender Email Address
Attach Image
From the drop-down list, select ON or OFF (default setting).
In the Email Address List section, do the following for each email address:
Select the checkbox in the Enable column. By default, Enable is not checked.
Enter the email address in the Email Address column.
Click Save.
FTP
section and transmitted from the camera via FTP to the remote FTP server.
In the Server Address text box, enter the FTP server IP address.
In the Port text box, enter the email server port number.
In the User Name text box, enter the FTP server user name.
In the Password
From the Mode drop-down list, select Active or Passive (default setting).
In passive mode, FTP the client initiates both connections to the server, solving the problem of
firewalls filtering the incoming data port connection to the client from the server. In order to
support passive mode FTP on the server-side firewall, the following communication channels
must be opened:
FTP server's port 21 from anywhere (client initiates connection)
FTP server's port 21 to ports > 1023 (server responds to client's control port)
FTP server's ports > 1023 from anywhere (client initiates data connection to
random port specified by server)
Ariel CM-3102 User and Installation Guide
www.
The Tunneled Transport Layer Security is used to tunnel an entire
.com
Events
December 12, 2018
information@itm.com
Advertisement
Table of Contents
