FLIR Ariel CM-3102 User And Installation Manual page 10

Document Scope and Purpose
Warning:
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient temperature
in the range -40° to 50°C (-40° to 122°F) for CM-3102-x-I models and -20°C to 65°C (-4° to 149°F)
for CM-3102-xE-I models, with no more than 90% non-condensing humidity.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous que la
régulation de température est suffisante pour répondre aux exigences de l'unité
(refroidissement/chauffage). La température de fonctionnement doit être maintenue dans la plage (-
40° à 50°C/-40° à 122°F) pour les modèles CM-3102-x-I et de (-20°C à 65°C/-4° à 149°F) pour les
modèles CM-3102-xE-I, sans condensation d'humidité supérieur à 90%.
4
1.800.561.8187
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a
bit of ethanol and wipe it gently. If the camera will not be used for an extended period of time,
put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at strong light, such as the sun or an incandescent lamp, which
can seriously damage the camera.
Make sure that the surface of the sensor is not exposed to a laser beam, which could burn
out the sensor.
If the camera will be fixed to a ceiling, verify that the ceiling can support more than 50
newtons (50-N) of gravity, or over
The camera should be packed in its original packing if it is reshipped.
Ariel CM-3102 User and Installation Guide
www.
information@itm.com
.com
December 12, 2018