FLIR Ariel CM-3102 User And Installation Manual page 66

6.3.1.5.6
The Events Source > Schedule screen is used for setting a trigger interval for notifications, defining
the method for storing a snapshot, recording on the edge, enabling email headers, defining the OSD
text, and setting the alarm schedule.
To set a trigger interval
To define the method to store a snapshot
To record the event on the camera
To enable sending an email notification
To define OSD text
To set the arming schedule
December 12, 2018
1.800.561.8187
Schedule
Select Enable. By default, Enable is not checked.
Move the Trigger Interval slider from 1 to 3600 seconds. The default setting is 10 seconds.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
information@itm.com
.com
67