FLIR Ariel CM-3102 User And Installation Manual page 56

6.3.1.4.8
The LDAP screen is used for configuring use of the Lightweight Directory Access Protocol, an industry-
standard protocol for accessing and maintaining distributed directory information services over an IP
network.
To configure LDAP basic settings
To configure group mappings
To configure authentication settings
6.3.1.4.9
The SSL screen is used for configuring the Secure Socket Layer (SSL) or Transport Layer Security
(TLS) protocol, which protects camera settings and username/password information. SSL/TLS is used,
in turn, by the HTTPS protocol for allowing secure IP connections between the camera and a web
browser over HTTP.
Note:
SSL is enabled from the
December 12, 2018
1.800.561.8187
LDAP
In the Server text box, enter the LDAP server address.
In the Port text box, enter the network port number of the LDAP server. The range is 1025 to
65535. The default is 389.
In the Base DN text box, enter or edit the default Distinguished Name (Domain Components) of
the parent entry. This is used for searching the directory tree in the LDAP server. The default
setting is dc=ipcamera,dc=com.
In the Bind DN Template text box, enter or edit the attributes used for authenticating the camera
on the LDAP server. The default setting is uid=%u,dc=users,dc=ipcamera,dc=com.
In the Search Template text box, enter or edit the attribute used for the Common Name. The
default is cn=%u.
In the Admins text box, enter or edit the attributes used for searching for an Administrator.
In the Operators text box, enter or edit the attributes used for searching for an Operator.
In the Users text box, enter or edit the attributes used for searching for a User.
Enter the User Name and Password in the respective text boxes to access the LDAP server.
Click Save.
SSL
Network > General
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
screen (page 48).
information@itm.com
.com
57