FLIR Ariel CM-3102 User And Installation Manual page 38

To set the zoom control
To set Auto Focus
To manually set the focus
To set the Zoom Trigger Control
To revert to the previous settings
The Basic Configuration tab includes the following screens:
Date & Time
6.3.1.2.1
The current time is displayed in the Current Camera Time text box. To set the date and time, select
Basic Configuration > Date & Time. The Date & Time screen is displayed.
December 12, 2018
1.800.561.8187
In the Zoom Control section, move the slider to the desired zoom between Wide (1.00) to Tele
(3.00).
In the Focus Control section, click Start. Auto Focus is adjusted.
Note:
If the Auto Focus function does not produce a clear picture, do the following:
Click Reset in the Reset Lens section.
Click Start in the Focus Control section. The image refocuses.
Continue with the lens setup procedure.
In the Focus Control section, move the slider to the desired focus between Far (1) to Near (100).
From the Step drop-down list, select the number of steps to set the focus: 1, 2, 4, 8, 16, 32, 64,
or 128.
In the Zoom Trigger Control section, from the Zoom Trigger drop-down list, select ON or OFF.
This setting determines if the camera will automatically focus itself after the zoom has been
changed.
In the Restore Position section, click Start. The previous settings are restored.
Note:
After clicking the Restore Position Start button, it is necessary to click the One-Push AF Start
button in the Focus Control section to refocus the lens.
Basic Configuration
Audio
(CM-3102-11-I only)
Date & Time
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
Firmware Basic Operations
.com
OSD
information@itm.com
39