FLIR Ariel CM-3102 User And Installation Manual page 89

Accessing the CM-3102 via a Web Browser
In the Day/Night Switch Control section, configure the following settings:
In the IR Control section, configure the following settings:
Click Reset if you want to return to factory default settings.
6.3.3.2.4
Manual mode opens the iris completely with a fixed gain. This mode should only be used in indoor
scenes with consistent lighting. Manual mode requires the user to set fixed values for shutter and gain
levels. Increasing the value of the fixed shutter increases the amount of light entering the sensor, which
allows a brighter and more detailed image. In a similar manner, utilizing gain and increasing its level
increases the sensitivity of the image sensor, which brightens the image and add details. This increases
the level of noise in the image.
90
1.800.561.8187
Mode See the explanation in the Auto Mode section above.
Time See the explanation in the Auto Mode section above.
Sensitivity See the explanation in the Auto Mode section above.
Mode See the explanation in the Auto Mode section above.
LED Brightness See the explanation in the Auto Mode section above.
Manual Mode
Figure 100: Manual Exposure Mode Settings
Ariel CM-3102 User and Installation Guide
www.
information@itm.com
.com
December 12, 2018