FLIR Ariel CM-3102 User And Installation Manual page 50

To access the FTP server
6.3.1.4.3
The RTSP screen is used for transmitting the encoded video stream. The RTSP protocol is used for
establishing the connection and controlling the streaming data between the camera and a device over
the web. Each stream can be sent by unicast to one device or broadcasted by multicast to multiple
devices. Unicast requires larger network bandwidth and more server resources, but is more stable than
multicast, which requires more settings.
To configure basic settings
December 12, 2018
1.800.561.8187
From the Enable drop-down list, select ON. The default is OFF.
Click Save.
Note:
Even when set to Off
card. However, the user will not be able to remotely access them via FTP.
RTSP
In the Login ID text box, enter your Login ID number.
Note:
It is recommended, but not necessary, to enable authentication in order to use RTSP.
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
information@itm.com
.com
51