FLIR Ariel CM-3102 User And Installation Manual page 67

Accessing the CM-3102 via a Web Browser
6.3.1.5.7
The Events Source > Tampering screen is used for setting the sensitivity of the camera in case of
tampering.
To enable tamper detection
To define the method to store a snapshot
To record the event on the camera
To enable sending an email notification
To define OSD text
To set the arming schedule
68
1.800.561.8187
Tampering
Select Enable. By default, Enable is not checked.
From the Sensitivity drop-down list, select High, Medium, or Low.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
Ariel CM-3102 User and Installation Guide
www.
information@itm.com
.com
December 12, 2018