FLIR Ariel CM-3102 User And Installation Manual page 71

Accessing the CM-3102 via a Web Browser
6.3.1.6.4
The SD Card screen is used for configuring the microSD card. The card status is displayed in the Mount
Status row. The status is displayed as mounted if the microSD card is installed and not_mounted if the
card is not installed.
To configure the microSD card
6.3.1.6.5
The Snapshot screen is used for configuring snapshot settings.
To configure snapshot settings
72
1.800.561.8187
SD Card
From the Overwrite drop-down list, select ON. The default is OFF.
Click Save.
Snapshot
In the Pre-Event Capture Count text box, enter the number of frames (1 to 10) to capture before
taking a snapshot of an event. The default is 3 frames.
In the Event Capture Interval text box, enter the time interval (1 to 10 seconds) to capture
between snapshots. The default is 1 frame.
In the Post-Event Capture Count text box, enter the number of frames (more than one) to
capture after taking a snapshot. The default is 3 frames.
Click Save.
Ariel CM-3102 User and Installation Guide
www.
information@itm.com
.com
December 12, 2018