FLIR Ariel CM-3102 User And Installation Manual page 80

In the Day/Night Switch Control section, configure the following settings:
In the IR Control section, configure the following settings:
Click Reset if you want to return to factory default settings.
December 12, 2018
1.800.561.8187
Caution:
Using a slow shutter speed causes moving objects to be blurred.
Attention:
L'utilisation de vitesses d'obturation faibles peut rendre les objets en mouvement flous.
Min Shutter Speed Select a suitable shutter speed according to the environmental luminance.
The following table displays the options:
Exposure Value See the explanation in the Auto Mode section above.
Backlight Compensation See the explanation in the Auto Mode section above.
Highlight Compensation See the explanation in the Auto Mode section above.
Digital WDR See the explanation in the Auto Mode section above.
Mode See the explanation in the Auto Mode section above.
Time See the explanation in the Auto Mode section above.
Sensitivity Use the slider to set the sensitivity between Low and High when switching from Day
to Night mode or Night to Day mode. When set to High, the camera automatically switches
between Day and Night modes upon minor changes in light intensity. When set to Low, the
camera automatically switches between Day and Night modes upon major changes in light
intensity.
Mode See the explanation in the Auto Mode section above.
LED Brightness See the explanation in the Auto Mode section above.
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
Advanced
Min Shutter Speed
PAL NTSC
1/100 1/120
1/250 1/250
1/500 1/500
1/1000 1/1000
1/2500 1/2500
1/5000 1/5000
1/10000 1/10000
.com
information@itm.com
81