FLIR Ariel CM-3102 User And Installation Manual page 65

Accessing the CM-3102 via a Web Browser
To set the arming schedule
6.3.1.5.5
The Events Source > Network screen is used for enabling notification in case the network connection is
lost or if there is another device that is using the same IP on the network as the camera.
To enable notification if the network connection is lost
To start recording if the network connection is lost
To activate the on-screen display if the network connection is lost
To enable notification in case of a network conflict
To start recording in case of a network conflict
To activate the on-screen display in case of a network conflict
66
1.800.561.8187
See instructions in section 6.3.1.5.1.
Network
In the Lost Network Connections section, select Enable. By default, Enable is not checked.
Click Save.
In the Recording section, select the Record on Edge checkbox. By default, it is not checked.
Click Save.
In the OSD section, select Enable. By default, Enable is not checked.
In the Text text box, enter the text to display in the on-screen display.
Click Save.
In the Network Conflict section, select Enable. By default, Enable is not checked.
Click Save.
In the Recording section, select the checkbox. By default, it is not checked.
Click Save.
In the OSD section, select Enable. By default, Enable is not checked.
In the Text text box, enter the text to display in the on-screen display.
Click Save.
Ariel CM-3102 User and Installation Guide
www.
information@itm.com
.com
December 12, 2018