In the Day/Night Switch Control section, configure the following setting:
In the IR Control section, configure the following settings:
Click Reset if you want to return to factory default settings.
The Exposure screen is used for configuring basic exposure settings and day/night settings. The
configurable settings depend on the selected Exposure mode. In the Exposure section, select one of the
following Exposure modes:
mode determines the configurable settings.
Note:
Settings are saved automatically. Clicking Reset returns the settings to factory defaults.
6.3.3.2.1
Auto Shutter mode s
level. This mode is recommended for outdoor environments and indoor environments with fluorescent
lighting as the main light source. This is the default setting.
December 12, 2018
1.800.561.8187
Gain
Set the gain between 0-48 dB. Increasing the gain lightens dark pictures resulting from
low-level lighting. The default is 0.
Digital WDR
See the explanation in the Auto Mode section above.
Mode
See the explanation in the Auto Mode section above.
Mode
See the explanation in the Auto Mode section above.
LED Brightness
See the explanation in the Auto Mode section above.
CM-3102-11-I Exposure Screen
Auto
Shutter, Flickerless,
Auto Shutter Mode
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
Auto
Iris, or Manual. The choice of the Exposure
automatically achieve a consistent video output
information@itm.com
.com
85