FLIR Ariel CM-3102 User And Installation Manual page 63

Accessing the CM-3102 via a Web Browser
A graph displays audio when is detected. Audio that is below the Sound Intensity Threshold is displayed
in green. When audio exceeds the defined threshold, it creates an audio event and is displayed in red.
A number of actions can be taken, including:
Setting a low threshold (for example, 25) means that the camera is more sensitive to noise, which results
in more alerts (displayed in red). The setting depends on the situation and environment. If the scene is
located in a quiet place, it is possible to use lower threshold. A noisy location requires a higher threshold.
When selecting Record to Edge, the recording includes the audio track. OSD must be enabled on the
Events Source > Audio screen, as well as from the
order to insert on-screen displays on clips and snapshots.
To enable using audio
To set the audio level
To define the method to store a snapshot
To record the event on the camera
To enable sending an email notification
To define OSD text
To set the arming schedule
64
1.800.561.8187
Storing
Sending a snapshot of the audio event to an FTP server
Storing a recordin
Creating an OSD (On-Screen
Sending an email notification of the audio event
Select the Audio checkbox.
Move the Sound Intensity Threshold slider to the desired level between 1-100.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
See instructions in section 6.3.1.5.1.
Ariel CM-3102 User and Installation Guide
www.
Display) overlay on the recording or snapshot
System > Basic Configuration > OSD
.com
card
card
screen, in
December 12, 2018
information@itm.com