FLIR Ariel CM-3102 User And Installation Manual page 40

6.3.1.2.3
The Firmware screen displays and is used to update the system firmware, and to display the hardware
version, product name (model number), product serial number, and product MAC address. To access
the Firmware screen, select Basic Configuration > Firmware.
To update system firmware
6.3.1.2.4
The Basic Operations screen is used for the following functions:
December 12, 2018
1.800.561.8187
Firmware
Click Browse to locate the firmware file.
Select the file. The file name is displayed (for example,
Note:
If you are upgrading from the GA firmware version 01.05.32 or 01.05.32.5 to version
01,05.37.4 or higher, you must update the .bin file from DNA version 2.1.2.4 or higher.
Click Upgrade. The upgrade process takes about three minutes. After the firmware has
upgraded successfully, the camera reboots. The following dialog box is displayed:
Click OK. The Live screen opens.
When the Internet Explorer dialog box asks you to close the window, click Yes. The window
closes.
Login Window.
Enter your user credentials and log into the camera. The new firmware version is displayed in
the Firmware Version text box.
Basic Operations
Setting the TV format
Importing settings from another unit
Exporting settings to another unit
Rebooting the camera
Ariel CM-3102 User and Installation Guide
www.
Accessing the CM-3102 via a Web Browser
Login window opens. See Figure 14:
information@itm.com
.com
).
41