Table of Contents
Advertisement
30.2 Error-Disable Settings
Use this screen to go to the screens where you can configure error disable related settings. Click
Advanced Application > Errdisable in the navigation panel to open the following screen.
Figure 170
The following table describes the labels in this screen.
Table 119 Advanced Application > Errdisable
LABEL
Errdisable Status
CPU protection
Errdisable Detect
Errdisable Recovery
30.3 Error-Disable Status
Use this screen to view whether the Switch detected that control packets exceeded the rate limit
configured for a port or a port is disabled according to the feature requirements and what action you
configure, and related information. Click the Click here link next to Errdisable Status in the Advanced
Application > Errdisable screen to display the screen as shown.
Chapter 30 Error-Disable
Advanced Application > Errdisable
DESCRIPTION
Click this link to view whether the Switch detected that control packets exceeded the rate
limit configured for a port or a port is disabled according to the feature requirements and
what action you configure, and related information.
Click this link to limit the maximum number of control packets (ARP, BPDU and/or IGMP)
that the Switch can receive or transmit on a port.
Click this link to have the Switch detect whether the control packets exceed the rate limit
configured for a port and configure the action to take once the limit is exceeded.
Click this link to set the Switch to automatically undo an action after the error is gone.
XMG1930 Series User's Guide
248
Advertisement
Table of Contents
Troubleshooting
