Table of Contents
Advertisement
33.2 Error-Disable Settings
Use this screen to go to the screens where you can configure error disable related settings. Click
Advanced Application > Errdisable in the navigation panel to open the following screen.
Figure 234
The following table describes the labels in this screen.
Table 152 Advanced Application > Errdisable
LABEL
Errdisable Status
CPU protection
Errdisable Detect
Errdisable Recovery
33.3 Error-Disable Status
Use this screen to view whether the Switch detected that control packets exceeded the rate limit
configured for a port or a port is disabled according to the feature requirements and what action you
configure, and related information. Click the Click here link next to Errdisable Status in the Advanced
Application > Errdisable screen to display the screen as shown.
Chapter 33 Error-Disable
Advanced Application > Errdisable
DESCRIPTION
Click this link to view whether the Switch detected that control packets exceeded the rate
limit configured for a port or a port is disabled according to the feature requirements and
what action you configure, and related information.
Click this link to limit the maximum number of control packets (ARP, BPDU and/or IGMP)
that the Switch can receive or transmit on a port.
Click this link to have the Switch detect whether the control packets exceed the rate limit
configured for a port and configure the action to take once the limit is exceeded.
Click this link to set the Switch to automatically undo an action after the error is gone.
GS2220 Series User's Guide
309
Advertisement
Table of Contents
Troubleshooting
