Table of Contents
Advertisement
Figure 56 Status
The following table describes the labels in this screen.
Table 22 Status
LABEL
DESCRIPTION
Device Information
Device Type
This field displays the model name of this Switch.
System Name
This field displays the name used to identify the Switch on any network.
Boot Version
This field displays the version number and date of the boot module that is currently on the
Switch.
System Location
This field displays the geographic location of your Switch. You can change the setting in the
Basic Setting > General Setup screen.
Firmware
This field displays the version number and date of the firmware the Switch is currently running.
Version
System Time
This field displays the current date and time in the UAG. The format is mm-dd-yyyy hh:mm:ss.
Hardware
This field displays the hardware version number of the Switch. The integer is the generation
Version
number of the Switch series, and the decimal is the version of the hardware change. For
example, V1.0 is a hardware version for the Switch where 1 identifies the first generation of the
Switch series, and .0 is the first hardware change.
System Up Time
This field displays how long the Switch has been running since it last restarted or was turned on.
MAC Address
This field displays the MAC addresses of the Switch.
Login
This field displays how many minutes a management session can be left idle before the session
Timeout(mins)
times out. After it times out you have to log in with your password again.
Serial Number
This field displays the serial number of this Switch. The serial number is used for device tracking
and control.
Registration
This field displays the MAC address of the Switch that you must use to register at myZyxel.com or
MAC Address
the NCC (Nebula Control Center).
Chapter 7 Status
XMG1930 Series User's Guide
83
Advertisement
Table of Contents
Troubleshooting
