ZyXEL Communications XMG1930 Series User Manual page 303

Figure 211 Management > Maintenance
The following table describes the labels in this screen.
Table 154 Management > Maintenance
LABEL DESCRIPTION
Firmware Click Click Here to go to the Firmware Upgrade screen.
Upgrade
Restore Click Click Here to go to the Restore Configuration screen.
Configuration
Backup Click Click Here to go to the Backup Configuration screen.
Configuration
Erase Running- Click Click Here to reset the configuration to the Zyxel default configuration settings. Note that
Configuration this will not reset the configuration to the factory default settings.
Save Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Configuration
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Click Custom Default to save the current configuration settings to a customized default file on
the Switch. This file can be used instead of the Zyxel factory default configuration file.
Reboot System Click Config 1 to reboot the Switch and load Configuration 1 on the Switch.
Click Config 2 to reboot the Switch and load Configuration 2 on the Switch.
Click Factory Default to reboot the Switch and load the Zyxel factory default configuration
settings on the Switch.
Click Custom Default to reboot the system and load a saved Custom Default configuration file
on the Switch. This will save the custom default configuration settings to both Config 1 and
Config 2. If a Custom Default configuration file was not saved, clicking Custom Default loads
the factory default configuration on the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently operating
on the Switch.
Tech-Support Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds for
log reports and download related log reports for issue analysis. Log reports include CPU history
and utilization, crash and memory.
Certificates Click Click Here to see the Certificate screen and import the Switch's CA-signed certificates.
Chapter 37 Maintenance
current configuration on the Switch.
XMG1930 Series User's Guide
303