Mode Changing - ZyXEL Communications XMG1930 Series User Manual

Use the Web Configurator to configure and manage the Switch directly in standalone mode or use
Nebula Control Center (NCC) to configure and manage the Switch in cloud mode. The Nebula Control
Center (NCC) is an alternative cloud-based network management system that allows you to remotely
manage and monitor the Switch. You may also access a minimized version of the Web Configurator in
cloud mode.
Nebula Cloud Management
To have Nebula manage the Switch, you must first register it at the Nebula web portal at https://
nebula.zyxel.com, and ensure that Nebula Control Center Discovery is enabled in Basic Setting > Cloud
Management > Nebula Control Center Discovery in the Switch Web Configurator.
Note: See the Switch's datasheet for the feature differences between standalone and
Nebula cloud management modes. You can find the Switch's datasheet at the Zyxel
website.
See the NCC (Nebula Control Center) User's Guide for how to configure the Switch using Nebula.
Figure 2 NCC Example Network Topology

1.1.3 Mode Changing

This section describes how to change the Switch's management mode.
Note: If you change the
managed mode, the configuration settings of the
you have configured in Nebula.
Note: If you change the
standalone mode, the
Chapter 1 Getting to Know Your Switch
's management mode from standalone mode to Nebula-
Switch
's management mode from Nebula-managed mode to
Switch
will reset to its factory-default settings.
Switch
XMG1930 Series User's Guide
22
will be overwritten with what
Switch